10 Techniques to Fix Windows Upgrade Error 0xC1900101 – 0x4000D

Rate this post

Last Updated on: 22nd December 2022, 08:19 am

How to Fix the Windows Update Error 0xC1900101 - 0x4000D

The upgrade error 0xC1900101 – 0x4000D sometimes pops on your computer screen when you’re trying to install the latest upgrades. It typically occurs when installing the Windows 22H2 update and restarting the system.

There can be a number of reasons behind this error, such as corrupt Windows update components, the device not meeting the update requirements, and insufficient space for the update. 

This guide will provide you with the techniques to resolve the problem on Windows 7,8 and 10.

Error 0xC1900101 – 0x4000D – What Is It?

Error 0xC1900101 – 0x4000D indicates a problem during the installation of a Windows update. This error message can be caused by a variety of factors, including issues with hardware, software conflicts, or problems with the update itself. 

In most cases, the best way to fix this error is to try installing the update again, making sure to follow all specific instructions provided by Microsoft. If the error persists, you may need to try using the Windows Update Troubleshooter or seek assistance from Microsoft support.

Error 0xC1900101 – 0x4000D in Windows 10 occurs when data migration during the second startup step fails to complete, leaving your computer vulnerable. This can be caused by several reasons, such as missing system files, a corrupt Windows Image, or a pending XML file. Additionally, you can encounter error codes due to third-party applications or services.

You can do a preliminary quick fix before applying the methods below:

Why Does Error 0xC1900101 – 0x4000D Occur?

Error 0xC1900101 – 0x4000D is a common error that occurs when trying to install Windows 10. This error can have many different causes, but some of the most common include:

  • Incompatibility with the hardware or drivers on your computer
  • Corrupted or incomplete Windows 10 installation files
  • An interruption during the installation process, such as a power outage or system crash

To fix this error, you may need to try a few different things. One potential solution is to check for any hardware or driver issues on your computer and upgrade or replace any components that are causing problems. 

You can also try running the Windows 10 installation again, making sure to avoid any interruptions during the process. If the error persists, you may need to download and install the latest version of Windows 10 from the Microsoft website

If this doesn’t even help you fix the error, try the following methods.

10 Techniques to Fix Error 0xC1900101 – 0x4000D

Error 0xC1900101 – 0x4000D is a common error that can occur when trying to install a new version of Windows. This error typically indicates that there is a problem with the installation process and that the new version of Windows is unable to be installed. There are a few potential methods you can try to fix this error, including the following:

Technique  1: Run the Troubleshooter for Windows Upgrades

troubleshooting window s

It is often possible to fix the error or learn why the problem occurred by troubleshooting Windows Update. Here are some guidelines to follow:

  • Step 1: Open Settings by pressing Win + I, then select Update & Security>Troubleshoot.
  • Step 2: Click the windows update option, open the Getup and Running section, and select Run. Now, the troubleshooter will open.
  • Step 3: You can fix this error by following the on-screen instructions. Press the click button to fix the error.
  • Step 4: Restart your PC.

Technique 2: Repair Corrupted System Files With SFC & DISM Tool

A corrupted system file or “Windows image” in your disk can also become a reason for the causing error 0x8007042B – 0x4000D. It can become a hindrance in Windows installation. Using SFC and DISM tools, you can fix the corrupted files. The steps to perform the scan are

  • Step 1: Logging as an administrator and opening the command prompt.
  • Step 2: Type the following command in prompt – sfc/scannow and press Enter.

cmd sf scannow

  • Step 3: Once the scanning process is completed and corruption is resolved, you can close the command prompt and restart the PC.
  • Step 4: In case the SFC is unable to resolve the issue, type DISM.exe/Online/Cleanup-image/Restorehealth. Then press Enter.

restore health

  • Step 5: Once the scan gets completed, check if the error is resolved. Restart the PC.

Technique 3: How to free up space on your hard drive

Windows 10 requires at least 32GB of free space to upgrade since it is a large file, so you might have to make sure you have enough free space to upgrade. You can delete unnecessary files or add more space by directly expanding the partition size. Here is the option to increase the partition size.

Option 1: Use Disk Cleanup

  • Step 1: Open start>Run>cleanmgr and press enter button.
  • Step 2: Once a small pop-up box appears,  select a drive to run the cleanup on. Once completed, click OK.
  • Step 3: Open a new window, select the files to delete and then click OK.

Cleanmgr - drive selection

Note: If you delete important files by mistake, you can recover deleted/lost files by using MiniTool Partition Wizard.

Option 2: Use MiniTool Partition Wizard

If your disk is filled with important files and there is no unallocated space, use the Extend Partition feature of MiniTool Partition Wizard to free up space.

  • Step 1: To enter the main interface -> launch MiniTool Partition Wizard 
  • Step 2: Click extend partition, on the left operation panel to restore the files which you don’t want to delete.

mini tool partition wizard

[Image Credit: https://www.partitionwizard.com ]

  • Step 3: Click on the drop-down menu to find out the free space in memory. Once you get it, drag the light blue block to find out the requirement for the free space. Then click the OK button.
  • Step 4: Click-> apply to execute the operation.

Technique 4: Delete or Rename that SoftwareDistribution Folder to Solve Your DLL Error

Sometimes, the update-related services are disabled. This can also cause the error 0x8007042B – 0x4000D during an OS upgrade. The error can also be caused if the SoftwareDistribution and Catroot2 folders are corrupted. To overcome this, delete and rename the SoftwareDistribution file by following the below-mentioned steps.

  • Step 1: Stop Windows Update Service. With WIN+R open RUN. type “services.msc” in the search box. Now click OK. Window update service will open. Right-click here and stop the service.

Window Update start stop

  • Step 2: The next step is to delete the Software Distribution Folder. To do this, open Windows Explorer and navigate to – C: \Windows folder. Locate the SoftwareDistribution folder. Right-click -> delete or rename.
  • Step 3: Once done, start the Windows Update Service.
  • Step 4: Next step will be to check for Windows updates. Now open Security > Windows Update and check for updates.

Technique 5: How to Perform a Clean Boot in Windows 7, 8 and 10

Some third-party apps or services often conflict with built-in apps or services. This can hinder the update process and trigger 0xC1900101 – 0x4000D errors during installation. To resolve the update error, you can perform a clean boot in Windows 7,8 & 10.

  • Step 1: Start > Windows Update Error 0xC1900101 – 0x4000D.
  • Step 2: Disable startup items selected by the scan.
  • Step 3:  Select hide all Microsoft services and then select disable all.

system configuration


  • Step 4: To fix Windows Update Error 0xC1900101 – 0x4000D press the Win + R keyboard key. Enter – msconfig and press OK.

Open Task Manager

  • Step 5: Open -> Task Manager window, right-click on each startup item and select Disable.
  • Step 6: Close the Task Manager and go back to the System Configuration window.
  • Step 7: Click OK on the Startup tab of System Configuration.

After that, restart your computer and try to install the Windows 10 update.

Technique 6: Disable Third-party Antimalware Software to Fix Security Warning

There is a high chance of conflicts between third-party antivirus software and updated files. To get rid of this 0x8007042B – 0x4000D error, you need to temporarily uninstall installed third-party security programs. 

If you successfully installed the latest Windows after doing so, you can reinstall the application again.

To uninstall third-party antivirus software, proceed as follows:

  • Step 1: Press the Win + R key to open the Run dialog. Then type appwiz.cpl in the search box and press Enter.
  • Step 2: In the Programs and Features window, find the antimalware software installed on your computer. Then right-click it and select the Uninstall option.
  • Step 3: Follow on-screen instructions to complete the uninstallation process.

Technique 7: Fixing Clear Pending .XML File

Pending the .xml file can also be a hindrance to the installation of a new OS on your device. To solve this error, you need to clear the pending .xml file. The steps are as follows:

  • Step 1: Press WIN+R and open RUN. Then type cmd.exe in the search box and click OK.
  • Step 2: Enter the following command and press Enter:
Ren NC:\Windows\wins shows \pending.XML pending.old

After that, rename the pending.xml file to pending.old.

Technique 8: Quick steps to View Windows Update Log

If you still cannot install Windows 10/11 due to errors 0xC1900101 – 0x4000D, check the Windows Update log file. The file is in the following path: 


If there are too many error codes in this file, just delete it to restart the installation of Windows 10/11.

Technique  9: Installing/upgrading Windows 10 Using an ISO File

In some cases, the error code C1900101 – 0x4000D could be fixed by updating Windows 10 from a Windows ISO file. To check this, follow the steps mentioned below

  • Step 1: Download Windows 10 in an ISO file. Open Windows 10 page and download the Media Creation Tool. Run this tool as an administrator and click Accept on the first screen.

If you run into the error, Windows upgrade Error 0xC1900101 – 0x4000D. You can fix this by following these instructions.

  • Step 2: To create the installation media  Select-> Language -> Windows Edition-> Click on Next
    • Now select ISO file-> click next
    • Click -> Save to put the Windows.iso file on the desktop. The installation of Windows 10 will start.
  • Step 3: Now update Windows 10 from the ISO file by following the instructions as 
    • Disable internet connection. Right-click the Windows.iso file (on your desktop) and click Mount.
    • Double-click the Settings. In the net pop-up screen, select Note Now and click Next
    • On-screen instructions will help you update your system

Technique 10: Setup Windows 10 With A Clean Installation

If you still get a Windows Update Error 0xC1900101 – 0x4000D try doing a clean install of Windows 10 to fix the problem.

Note: Take a backup of all important files. And ensure that the USB is accessible by the system.

How can Driver Restore help you in resolving Error 0xC1900101 – 0x4000D?

Did the Windows installation fail in the SECOND_BOOT phase? Is it displaying an error Error 0xC1900101 – 0x4000D during the updation of Windows?  

If so, feel free to contact Driver Restore in case you encounter any issues in using the above-mentioned techniques. In case, you have any better suggestions, email us or leave the suggestion in the comment box. 

Driver Restore provides a tailored service offering the best service to help users successfully update their drivers on Windows 7,8 &10. However, if you don’t want to struggle with manual repair techniques, please use the automatic software. All recommended products have been tested and approved by our professionals. To get detailed information browse our website.

Leave a Reply

Your email address will not be published. Required fields are marked *